LL1941 Lundahl Moving Coil SUT
LL1941 Lundahl Moving Coil SUT
LL1941 Lundahl Moving Coil SUT
Roll over image to zoom in Click on image to zoom
LL1941 Lundahl Moving Coil SUTLL1941 Lundahl Moving Coil SUTLL1941 Lundahl Moving Coil SUT

LL1941 Lundahl Moving Coil SUT

Lundahl
Wire: Cardas Copper
PCB: Standard
Price:
£199.00 £238.80 Inc. VAT

  • The Lundahl LL1941 is a high-performance moving coil step-up transformer designed for premium MC SUT and moving coil preamp applications. Configurable for turns ratios of 1:16 and 1:32, the LL1941 is an excellent choice for low-output moving coil cartridges requiring low noise, natural dynamics, and precise cartridge loading.

     

    The transformer is fully compatible with the MC1 DIY Kit, allowing you to build your own high-quality moving coil step-up transformer preamp using the same Lundahl technology found in high-end commercial MC SUT designs.

     

    The LL1941 combines Lundahl’s unique uncut amorphous cobalt core with their dual-coil architecture and Cardas high-purity copper wire in an oversized design intended to maximise musicality, headroom, and detail retrieval. The result is a moving coil transformer that punches well above its price point while retaining the organic, engaging sound Lundahl transformers are known for.

     

    Available with either copper or silver wire depending on your system preference and budget.

     

    Every LL1941 pair includes a free HASL mounting PCB suitable for DIY moving coil SUT projects. For premium builds, you can upgrade to an ENIG gold-plated PCB for an additional £10. 

     

    Most Lundahl transformers are wound to order and typically require a 4–8 week lead time. We do however stock selected popular models, in which case your order will ship immediately.

     

    If you need help selecting the correct ratio, cartridge loading, or designing your own moving coil step-up transformer preamp, please get in touch.

Featured product

View details
MC1 DIY Kit – Lundahl Moving Coil Step-Up Transformer Preamp
MC1 DIY Kit – Lundahl Moving Coil Step-Up Transformer Preamp
MC1 DIY Kit – Lundahl Moving Coil Step-Up Transformer Preamp
Roll over image to zoom in Click on image to zoom
MC1 DIY Kit – Lundahl Moving Coil Step-Up Transformer PreampMC1 DIY Kit – Lundahl Moving Coil Step-Up Transformer PreampMC1 DIY Kit – Lundahl Moving Coil Step-Up Transformer Preamp

MC1 DIY Kit – Lundahl Moving Coil Step-Up Transformer Preamp

Orso Audio

*Shipping June 2026*

 

The MC1 DIY kit is a complete parts pack to build your own step-up transformer preamp for moving coil (MC) cartridges. Used between your turntable and a standard MM phono input, a properly designed SUT increases signal voltage passively while preserving the low-noise, dynamic character that makes transformer coupling so compelling.

 

This kit follows the same design intent as our assembled MC1 units - robust mechanical grounding, reliable switching, and a layout that’s built for consistent real-world results.

What's included

  • Aluminium enclosure with black front panel
  • Gold-plated PCB
  • Gold-plated RCA connectors
  • High-quality switches
  • Grounding lug / hardware
  • Resistors and capacitors required for the circuit
  • Mounting hardware and essential build items required to complete assembly
  • Transformers, if purchased together

 

This kit is compatible with all Lundahl moving coil step-up transformers. 

Skill level

This is a straightforward DIY build, but it is not a “first soldering project.” We recommend prior soldering experience, as the parts are high quality and can be damaged by excess heat or poor technique.

Tools you'll need

  • Soldering iron (temperature controlled recommended)
  • Good quality solder
  • Small hand tools (flush cutters, pliers, screwdriver)

Note on responsibility

This is a DIY kit. Assembly, testing, and safe operation are the builder’s responsibility. If you are not confident with soldering and basic electronics handling, consider an assembled unit instead.

Transformers: None
Price:
£124.00 £148.80 Inc. VAT
MC Load Calculator

MC1 Load Calculator

Optimise your moving coil cartridge loading

Results

Required Resistor (Theoretical):
N/A
MC1 Resistor:
N/A
MC1 Input Z:
N/A
Voltage Gain:
N/A
Output Voltage:
N/A

Instructions

  • Select your transformer model and step-up ratio
  • Enter your phono input impedance (default is 47kΩ)
  • Enter the desired load impedance for your cartridge
  • Optionally enter cartridge specs for gain predictions
  • Click Calculate for loading recommendations

Notes:

When the desired load is below 40 Ω, you’ll see an advisory suggesting a primary-side load. Calculations still run normally.

"No resistor required" - Phono input already provides suitable load

Moving Coil Step Up Transformers explained

Unsure what exactly is going on? Read our blogs for a deep dive

Find out more

Recently viewed