Desired load is below 40 Ω. Consider using a primary-side load for very low target impedances.
-
Order a pair of LL1620, LL1623, LL1627, LL1679 or LL9202 and a pair of large Lundahl transformer covers and save 10%.
You can order any configuration or DC air gap, just ask.
Lead time
All Lundahl transformers need to be ordered from the factory, which can take between 4-8 weeks to arrive.
MC1 Load Calculator
Optimise your moving coil cartridge loading
Results
Required Resistor (Theoretical):
N/A
MC1 Resistor:
N/A
MC1 Input Z:
N/A
Voltage Gain:
N/A
Output Voltage:
N/A
Instructions
- Select your transformer model and step-up ratio
- Enter your phono input impedance (default is 47kΩ)
- Enter the desired load impedance for your cartridge
- Optionally enter cartridge specs for gain predictions
- Click Calculate for loading recommendations
Notes:
When the desired load is below 40 Ω, you’ll see an advisory suggesting a primary-side load. Calculations still run normally.
"No resistor required" - Phono input already provides suitable load
Moving Coil Step Up Transformers explained
Unsure what exactly is going on? Read our blogs for a deep dive
Find out more